# 6x6 Concrete Slab

## Results

- —
^{3} - —
^{}BagsSince this is over 1 yard, you may want to consider having a truck deliver your concrete.

- —
^{}Cost

## How much concrete for a 6x6 slab?

Here’s how you can calculate the volume of concrete required for a 6x6 slab:

**Determine the thickness of the slab.**Let's say the thickness is 4 inches (which is a common thickness for residential slabs).**Convert the thickness to feet.**4 inches is 1/3 of a foot (since 1 foot = 12 inches), so it becomes 1/3 feet, or 0.33 feet.**Calculate the volume.**Use the following formula: length (in feet) x width (in feet) x thickness (in feet).**Multiply the volume by the concrete mix ratio.**For typical residential applications, a mix ratio of 1:2:4 (1 part cement, 2 parts sand, 4 parts gravel) is common.

So, for a 6x6 slab with a thickness of 4 inches:

- Thickness in feet = 4 inches / 12 = 0.33 feet
- Volume = 6 feet x 6 feet x 0.33 feet = 11.88 cubic feet

For a 6x6 slab with a thickness of 6 inches:

- Thickness in feet = 6 inches / 12 = 0.5 feet
- Volume = 6 feet x 6 feet x 0.5 feet = 18.09 cubic feet

With those numbers in mind, the total volume of concrete needed would be **11.88 to 18.09 cubic feet** or **0.44 to 0.67 cubic yards** of concrete, depending on the thickness you need.

## 6x6 concrete slab cost

The cost of a 6x6 concrete slab can vary based on several factors. Factors such as the location, local labor and material prices, site preparation requirements, and the specific design of the slab can influence the overall cost.

To get a more accurate estimate, it's recommended to obtain quotes from local contractors who can take these factors into account and provide a detailed cost breakdown for your project.

Additionally, considering any optional features or finishes, such as stamped patterns or decorative coatings, will also impact the final cost of the concrete slab.

### Average Cost by Thickness

Slab Thickness | Average Price per Square Foot (Without Labor) |
---|---|

2 inches | $4 - $6 |

4 inches | $6 - $8 |

6 inches | $8 - $10 |

8 inches | $10 - $12 |

### Cost of a 6x6 concrete slab 4 inches thick

For a 4 inch slab, you can expect to pay anywhere from $216 to $ 288 plus any additional material and labor costs (if needed).

Slab Thickness | Average Price |
---|---|

4 inches | $216 - $288 |

### Cost of a 6x6 concrete slab 6 inches thick

For a 6 inch slab, you can expect to pay anywhere from $288 to $360 plus any additional material and labor costs (if needed).

Slab Thickness | Average Price |
---|---|

6 inches | $288 - $360 |

### Average cost for a 6x6 Slab

Based on the average price for each thickness, here's how much you can expect to pay given the thickness:

Slab Thickness | Average Price for a 6x6 Slab |
---|---|

2 inches | $144 - $216 |

4 inches | $216 - $288 |

6 inches | $288 - $360 |

8 inches | $360 - $432 |

## How thick should a 6x6 concrete slab be?

The thickness of a concrete slab depends on a bunch of different factors, including the intended use of the slab, the soil conditions, and the expected loads it will need to bear. Here are some considerations for thickness:

**Intended Use:**If the slab is for light-duty residential use, such as a large patio, a thickness of 4 inches is commonly used. For heavier applications, such as a driveway or the base of a house, a thicker slab of 6 or 8 inches may be required.**Soil Conditions:**The soil's load-bearing capacity beneath the slab affects the required thickness. If the soil is stable and well-compacted, a thinner slab will work fine. However, if the soil is less stable or prone to settling, a thicker slab may be necessary to distribute the load more evenly.**Expected Loads:**Consider the weight and frequency of loads the slab will bear. For example, if you plan to park a heavy truck on it, you’ll need a thicker slab as opposed to a walkway for people.**Reinforcement:**Adding reinforcement, such as rebar or wire mesh, can increase the strength and durability of the slab, allowing for a thinner thickness while still supporting the necessary loads.

With that said, while a 4-inch thickness is common for a slab of this size, the specific thickness should be determined based on factors like intended use, soil conditions, expected loads, and whether reinforcement will be used.

These are simply guidelines — consulting with a structural engineer or local building codes can provide additional guidance on the appropriate thickness for your specific project.

## How many bags of concrete do I need for a 6x6 slab? Or should I order a truck?

To determine the number of bags of concrete needed, you'll need to calculate the volume of concrete required and then divide by the volume of concrete each bag can produce.

Tip:Since this amount is less than a yard, bags could still make sense. However, it's never a bad idea to order by the truck.

Assuming a slab thickness of 4 inches (which is 1/3 of a foot), we've already calculated the volume of concrete needed for the slab as approximately 0.44 cubic yards.

Now, you need to convert cubic yards to cubic feet because concrete bags are usually sold in cubic feet.

1 cubic yard = 27 cubic feet

So, to convert 0.44 cubic yards to cubic feet:

- Volume in cubic feet = 0.44 cubic yards × 27
- Volume in cubic feet ≈ 11.88 cubic feet

Now, we can determine how many bags of concrete you’ll need. Typically, an 80 lb. bag of concrete mix produces 0.6 cubic feet of concrete. So, to find out how many bags you need:

- Number of bags = Volume in cubic feet / Volume per bag in cubic feet
- Number of bags = 11.88 cubic feet / 0.6 cubic feet per bag
- Number of bags ≈ 20 bags

So, you would need about 20 bags of concrete for a 6x6 slab with a thickness of 4 inches if using 80 lb. bags.

### Number of bags needed

Bag Size | Bags Needed |
---|---|

40 lbs. | 40 |

50 lbs. | 32 |

60 lbs. | 27 |

80 lbs. | 20 |

## How many yards of concrete for a 6x6 slab?

To determine how much concrete is needed, you'll need to calculate the volume of concrete required based on the dimensions of the slab and its desired thickness.

If the slab will be 4 inches thick:

**Convert the thickness to feet:**4 inches is equal to 1/3 of a foot (since 1 foot = 12 inches).**Calculate the volume of concrete in cubic feet:**Use the formula: Length (in feet) x Width (in feet) x Thickness (in feet).**Convert the volume to cubic yards:**Divide the volume in cubic feet by 27 (since 1 cubic yard is equal to 27 cubic feet).

If the slab will be 6 inches thick:

**Convert the thickness to feet:**6 inches is equal to 1/2 of a foot (since 1 foot = 12 inches).**Calculate the volume of concrete in cubic feet:**Use the formula: Length (in feet) x Width (in feet) x Thickness (in feet).**Convert the volume to cubic yards:**Divide the volume in cubic feet by 27 (since 1 cubic yard is equal to 27 cubic feet).

Here's how to do it:

- Thickness in feet = 4 inches / 12 = ~0.33 feet or 6 inches / 12 = ~0.5 feet
- Volume = 6 feet x 6 feet = 36 square feet
- Number of cubic yards = (36 square feet / 27) * 0.33 feet = 0.44 cubic yards or (36 square feet / 27) * 0.5 feet = 0.67 cubic yards

So, you would need roughly 0.44 to 0.67 cubic yards of concrete for a 6x6 slab, depending on whether you go with a thickness of 4 inches or 6 inches. However, it's always a good idea to order a little more concrete than calculated to account for any miscalculations or spillage during pouring.

## How much rebar do I need for a 6x6 slab?

To figure out how much rebar you’ll need, you'll want to consider factors such as the intended use of the slab, the soil conditions, and any local building codes or regulations. If you aren’t familiar, Rebar (short for reinforcement bar) is typically used to reinforce concrete and improve its strength and durability.

Tip:If you'd like to skip the math, you can use our rebar calculator.

For a 6x6 slab, you can follow these general guidelines:

### Dimensions in Inches

- Length: 6 feet × 12 inches/foot = 72 inches
- Width: 6 feet × 12 inches/foot = 72 inches

### Number of Rebars

Lengthwise (6 feet or 72 inches):

- Spacing: 18 inches
- Number of rebars: 72 inches / 18 inches = 4 rebars

Widthwise (6 feet or 72 inches):

- Spacing: 18 inches
- Number of rebars: 72 inches / 18 inches = 4 rebars

### Length of Rebars

Lengthwise:

- Each rebar will span the length: 6 feet = 6 feet each
- Number of rebars: 4
- Total length: 4 rebars × 6 feet each = 24 feet

Widthwise:

- Each rebar will span the width: 6 feet = 6 feet each
- Number of rebars: 4
- Total length: 4 rebars × 6 feet each = 24 feet

### Total Rebar Length

- Lengthwise: 24 feet
- Widthwise: 24 feet

So, for a 6x6 slab with rebar spaced 18 inches apart, you will need
**
about 48 feet of rebar
** (not including overlap or wastage).

### Overlap and Wastage

Include additional length for overlaps (splicing) and wastage. A common practice is to add 10-15% extra.

Extra rebar for overlaps and wastage (10%): 48 feet × 1.10 = 53 feet

So, you should consider purchasing
**
about 53 feet of rebar** to account for overlaps and potential wastage.

## Explore More Measurements

Here's a collection of slab sizes that are feasible with bags (although ordering a truck is never a bad idea!)

These are some other common sizes, although much larger — you'll need a truck!

## Get the latest in your inbox.

Signup to be the first to know when we publish updates, best-practices, tips and tricks.